Your Summer Maintenance Guide for Robotic Pool Cleaners
Discover essential weekly, biweekly, and monthly tasks to ensure efficient performance and longevity of your cleaner.
Summer is here, which means more regular pool maintenance is needed. But not only do pools need upkeep in this warm season. If you regularly use your pool, your robotic pool cleaner will face high demands from external factors and conditions. But with proper care and maintenance, your robotic pool cleaner can work miracles for quite a while, as timely maintenance guarantees efficiency, durability, and ultimately a sparkling clean pool.
Now talking about maintenance, there is a proper schedule for maintaining your pool cleaner that involves weekly, biweekly, and monthly maintenance tasks; all of which you will learn about in this blog in detail.
Why Summer Challenges Robotic Pool Cleaners
Summer means lots of pool fun, but also lots of challenges for your robotic pool cleaner. Just think of excessive debris, high heat, and frequent swimming to put some stress on it. These things also break down performance, and if this is not addressed, they could even damage the pool cleaner. Clogged filters or imbalanced water chemistry, say, can cut into the performance of your robotic swimming pool cleaner.
Worry not, the upcoming pool cleaner maintenance schedule addresses these challenges in detail.
Weekly Maintenance Tasks for Your Robotic Pool Cleaner
Weekly maintenance is easy and swift. It only takes about 15-20 minutes and helps prevent major issues.
Empty and Clean the Filter Basket
Why: Summer debris, like leaves and twigs, fills the filter quickly, reducing suction power.
How: Remove the filter basket, empty debris into a trash bin, and rinse thoroughly with a garden hose. Check for tears or damage.
Tip: To remove fine debris (e.g., sand or pollen), use a soft brush to scrub the filter. Replace damaged filters immediately.
Inspect and Clean Brushes or Rollers
Why: Brushes remove algae and dirt, but can get tangled with hair or stringy debris.
How: Check brushes for tangled debris. Use scissors to cut away hair or threads. Rinse with water to remove sunscreen residue.
Tip: Rotate brushes to ensure even wear, if your model allows.
Check the Power Cord
Why: A tangled or damaged cord can cause malfunctions or safety hazards.
How: Untangle the cord fully and inspect for cuts, frays, or exposed wires. Store it loosely coiled to prevent kinks.
Tip: Avoid leaving the cord in direct sunlight to prevent UV damage.
Test Pool Chemistry
Why: Imbalanced water (e.g., high chlorine or pH) can corrode cleaner components.
How: Use a pool test kit to check pH (ideal: 7.2–7.6), chlorine (1–3 ppm), and alkalinity (80–120 ppm). Adjust as needed.
Tip: Run the cleaner after balancing chemicals to avoid damage.
Biweekly Pool Cleaner Maintenance Tasks (Every 2 Weeks)
Biweekly maintenance tasks may take a bit long than weekly tasks, around 20-30 minutes, but they focus on deep cleaning.
Clean the Impeller and Pump Area
Why: Debris can clog the impeller, reducing water flow and cleaning efficiency.
How: Consult your cleaner’s manual to access the impeller. Remove debris, such as small pebbles or twigs, and rinse the area with water.
Tip: If the impeller is hard to access, consider professional servicing.
Inspect Tracks or Wheels
Why: Worn or debris-stuck tracks/wheels impair movement, leaving parts of the pool uncleaned.
How: Check for cracks, wear, or embedded debris. Clean with a hose or brush. Lubricate moving parts if recommended by the manufacturer.
Tip: Replace worn tracks promptly to avoid motor strain.
Run a Deep Cleaning Cycle
Why: A thorough cleaning cycle removes built-up grime.
How: Run the cleaner on its most intensive setting (if available) in a well-balanced pool. Afterward, clean the filter and brushes again.
Tip: Schedule this for a day when the pool isn’t in use.
Monthly Maintenance Tasks for Long-Term Care
Monthly maintenance focuses on the pool cleaner’s overall condition and takes around 30-45 minutes.
Deep-Clean the Entire Unit
Why: Sunscreen, oils, and algae can build up on the cleaner’s body.
How: Rinse the entire unit with fresh water. Use a mild, non-abrasive cleaner and a soft cloth to wipe down the exterior. Avoid harsh chemicals.
Tip: Dry the cleaner thoroughly before storing to prevent mold.
Inspect for Wear and Tear
Why: Summer’s heavy use can accelerate wear on parts like seals or motors.
How: Look for leaks, unusual noises, or reduced performance. Test all functions (e.g., climbing walls, scrubbing).
Tip: Contact the manufacturer or a technician if you notice issues.
Your Summer Maintenance Schedule at a Glance
Here’s an illustration of all the weekly, biweekly, and monthly tasks so you can take a quick glance.
Why the Aiper Scuba X1 Pro Max Shines for Summer Pool Care
The Aiper Scuba X1 Pro Max simplifies summer pool upkeep. Its cordless design prevents annoying cord tangles. It cleans floors, walls, waterlines, and surfaces with ease. Strong suction removes leaves and small debris. The 3μm filter traps tiny particles like dust or algae. Smart navigation ensures full coverage for pools up to 3,200 sq.ft. These features cut down on manual cleaning time.
Multiple cleaning modes tackle summer debris effectively. The app shows battery life and cleaner status instantly. The device returns to you for easy retrieval. Wireless charging is fast and hassle-free. A long battery life handles extended sessions. An optional tool checks water balance for a healthy pool. This keeps your pool sparkling all summer with minimal effort.
Conclusion: Enjoy a Clean Pool All Summer
Pool cleaner maintenance is not a big deal if you know what to do. With a little weekly, biweekly, and monthly care, you will be able to pamper your robotic pool cleaner and your pool. A better-maintained pool cleaner keeps the pool clean; it performs better and last longer. So, get your schedule into action for a summer of fun without a care!
Got questions? Share them with us in the comments below or check our related pool care guides for more information.